Split seal
you are here: Home »Split seal

Some types of machinery are cumbersome to maintain. Large shafts, heavy components, and immovable drivers are some of these concerns. Often, a typical mechanical seal is impractical to use by the nature of it’s installation requirements. In these cases it is frequently beneficial to use a Split Seal.

In a Split Seal, all components are literally cut or split in half and they are assembled onto the equipment without removal or disassembly of the major equipment components. Obviously, these seals are prone to leak more readily than non-split seals so they are generally applied to processes where some leakage is acceptable. Even with some leakage, they will out perform common packing.

Split Seals are often used on mixers, agitators and large volume, large shafted pumps. Aside from the fact that the components are split, split seals operate virtually the same way that most single cartridge or shaft mounted seals operate. By nature of their split design, their application is limited to lower pressures and non-volatile liquids.

Search Products: A|B|C|D|E|F|G|H|I|J|K|L|M|N|O|P|Q|R|S|T|U|V|W|X|Y|Z|0~9 |

Copyright © 2010 WORLD SEAL All Rights Reserved. | Mixer Mechanical Seal

Send Message